BC700XL Brush Chipper
- Move from jobsite to jobsite with ease
- Maximum productivity while minimizing maintenance
- Safety features designed with the operator in mind
General
| Manufacturer | Vermeer |
| Model | BC700XL Brush Chipper |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
Engine - Option one
| Oil Filter | Spin-on |
| Make and Model | Kohler ECH740 |
| Maximum Angle of Continuous Operation | 25deg |
| Clutch Type | Manual |
| Gross Horsepower (Maximum) | 25hp (18.6kw) |
| Cooling Medium | Oil/Air |
| Max Fuel Consumption | 2.4gph (9.1lph) |
| Fuel Tank Capacity | 6gal (22.7L) |
| Torque (Max) | 41.7ft-lb (56.5Nm) |
| Alternator | 20A Charging |
| Recommended Oil | Kohler oil or API CH4/SJ |
| Air Cleaner | Kohler HD 2-Stage Dry |
| Oil Volume with Filter | 2qt (1.9L) |
| Fuel Type | Gasoline |
General Dimensions and Weights
| Tongue Weight - Engine Option One | 180lbs (81.6kg) |
| Length - Table Down, Tongue Extended | 136in (345.4cm) |
| Weight - Engine Option One | 1800lbs (816.5kg) |
| Height | 102in (259.1cm) |
| Width | 71in (180.3cm) |
| Length - Feed Table Up, Tongue In | 115in (292.1cm) |
Feed System
| Feed Roller Dimension | 10" Diameter |
| Motor Manufacturer | White Hydraulics |
| Feed Roller Orientation | Horizontal |
| Feed Roller Clamp Type | Spring/Feed Roller Weight |
| Pinch Point - Distance to End of Feed Table | 65.4in (166.1cm) |
| Motor Displacement | 14 |
| Infeed Hopper Height | 22.1in (56.1cm) |
| Feed Roller Minimum Distance to Drum | 4in (10.2cm) |
| Weight of Feed Roller | 100lbs (45.4kg) |
| Infeed Table Length | 30.2in (76.7cm) |
| Infeed Throat Capacity | 6" x 8" (15.24 cm x 20.32 cm) |
| Feed Speed | 49.4ft/min |
| Infeed Table Width | 41.2in (104.6cm) |
| Distance from Feed Table to Ground | 28.1in (71.4cm) |
| Feed Roller Clamp Load | 525lbs (238.1kg) |
Drum/Disc Cutting System
| Bedknife Size | 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert |
| Weight With Shaft | 176lbs (79.8kg) |
| Air Flow | 5000cfm |
| Thickness | 1.3in (3.2cm) |
| Diameter | 23.9in (60.7cm) |
| Fixture Method | Welded |
| Speed | 1748 |
| Replaceable Threaded Knife Block | Yes |
| Width | 8in (20.3cm) |
| Bedknife Material | ASTM A572 Grade 50 |
| Material Capacity | 6in (15.2cm) |
| Knife Thickness | .6in (1.6cm) |
| Material | A8 Chipper Steel |
Safety System
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Dual green hold-to-run buttons |
| Diameter | 2in (5.1cm) |
| Bottom Feed Stop Bar Diameter | 2in (5.1cm) |
| Material Thickness | .1in (.3cm) |
| Positions | Four position: (E-Stop), Forward, Stop, (Reverse) |
| Bottom Feed Stop Bar Material Thickness | 12" (30.48 cm) |
Other Options
| Special Paint | Available, Optional |
| Extended Warranty | Available, Optional |
| Preventive Maintenance | Available, Optional |
Cutter Drive Components - Engine Option One
| Manufacturer | Linkbelt |
| Dynamic Capacity | 5640lbs (2558.3kg) |
| Belt Idler/Tensioner | Spring-loaded adjustable Idler |
| Belt Type | 2-band 5-V profile Aramid |
| Bore | 1.5in (3.8cm) |
| Type | Flange-mounted ball type, self-aligning |
| Static Capacity | 4460lbs (2023kg) |
Hydraulic System
| Filtration Method | Return flow filtration, 10 micron |
| System relief pressure | 2500psi (172.4bar) |
| Tank capacity | 6.8gal (25.7L) |
| Recommended Oil Type | Vermeer VMF Gold |
| System Type | Open center |
| Pump Flow at Maximum RPM | 3.8gpm (14.4L/min) |
Electrical System
| Switches | Hold-to-run, sensitivity selector |
| Battery | Group 26, 400 CCA |
| Standard Gauges | Hour meter |
| System Voltage | 12 Volt |
| Controller | Vermeer ACS CB02 |
Chassis
| Fender Description | .1"/(.3 cm) Steel bolt-on |
| Hitch Type | 2"/(5.1 cm) ball coupler |
| Frame Description | 3/16"/(.5 cm) ASTM A1011 steel |
| Manufacturer - Option Two | Dexter |
| Capacity - Option Two | 2000 lb/(907.2 kg) |
| Axle/Suspension - Option Two | 2000lb/(907.2 kg) rubber torsion axle with electric brakes |
| Tires - Option One | ST185/80D13 load range D |
| Axle/Suspension | 2000 lb/(907.2 kg) rubber torsion axle |
| Capacity - Option One | 2000 lb/(907.2 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber Torsional |
| Wheels - Option One | 13 x 5, bolt circle 5 on 4.5 |
| Type - Option Two | Rubber torsional, braked |
| Trailer Light Type | LED |
| Brake Type | Electric optional |
Discharge System
| Rotation Type | Manual |
| Rotational Lock | Standard Latch |
| Chute Rotation Angle | 240deg |
| Deflector Thickness | .1in (.2cm) |
| Chute Height | 97.2in (246.8cm) |
| Side Wall Thickness | .1in (.3cm) |
| Bottom Thickness | .1in (.3cm) |
| Top Thickness | .1in (.3cm) |