BC1000XL Gas Brush Chipper
- Feed with machine intelligence for maximum productivity
- Spend less time maintaining and more time working
- Safety features designed with the operator in mind
General
| Manufacturer | Vermeer |
| Model | BC1000XL Gas Brush Chipper |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Height | 101in (256.5cm) |
| Sound Power | 119 dB(A) |
| Tongue Weight - Engine Option One | 520lbs (235.9kg) |
| Weight - Engine Option One | 4680lbs (2122.8kg) |
| Length - Table Down, Tongue Extended | 208in (528.3cm) |
| Length - Feed Table Up, Tongue In | 160in (406.4cm) |
| Width | 66.5in (168.9cm) |
Engine - Option one
| Make and Model | Deutz G2.9 L4 |
| Oil Filter | Spin-on |
| Clutch Type | Clutchless PTO |
| Fuel Type | Unleaded and E10 gasoline |
| Recommended Oil | 10W30 |
| Clutch Drive Engagement | Belt tensioner |
| Fan | 18.75-in suction |
| Alternator | 95 amps |
| Coolant Capacity (Engine and Radiator) | 5.5gal (20.8L) |
| Maximum Angle of Continuous Operation | 30deg |
| Oil Volume with Filter | 8qt (7.6L) |
| Max Fuel Consumption | 4gph (15.3lph) |
| Torque (Max) | 154ft-lb (208.8Nm) |
| Gross Horsepower (Maximum) | 72.4hp (54kw) |
| Cooling Medium | Liquid cooled |
| Air Cleaner | 2-stage dry with safety element |
| Fuel Tank Capacity | 20gal (75.7L) |
| Number of Cylinders | 4 |
Other Options
| Extended Warranty | Optional |
| Special Paint | Optional |
| Preventive Maintenance | Optional |
Safety System
| Actuation Force | 34lbs (15.4kg) |
| Positions | 4: E-stop, forward, neutral, and reverse |
| Reset Method | Green hold-to-run button |
| Reduced Sensitivity | 12deg |
| Normal Sensitivity | 22deg |
| Actuation Force (BFSB) | 34lbs (15.4kg) |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Bottom Feed Stop Bar Diameter | 2in (5.1cm) |
| Green Hold to Run Button | Standard |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
Drum/Disc Cutting System
| Diameter | 20in (50.8cm) |
| Number of Knives | 2 |
| Bedknife Material | 1018 |
| Bedknife Thickness | 1in (2.5cm) |
| Material | A8 chipper steel |
| Knife Thickness | .6in (1.6cm) |
| Material Capacity | 12in (30.5cm) |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3.5 " x 17.3 " (8.9 cm x 43.8 cm) |
| Air Flow | 580cfm |
| Fixture Method | Weld-on |
| Number of Paddles | 5 |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Knife Size | 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) |
| Useable Edges | 2 |
| Safety Lock - Number of Positions | 2 |
| Weight With Shaft | 460lbs (208.7kg) |
| Speed | 2220 rpm |
| Thickness | 20in (50.8cm) |
Cutter Drive Components - Engine Option One
| Type | Spherical rollers |
| Manufacturer | Linkbelt |
| Bore | 2.4in (6.1cm) |
| Static Capacity | 53500lbs (24267.2kg) |
| Dynamic Capacity | 31400lbs (14242.8kg) |
| Belt Type | 5V |
| Belt Idler/Tensioner | Yes |
| Number of Bearings | 2 |
Electrical System
| System Voltage | 12 volt |
| Battery | Group 24; 580 CCA |
| Switches | Droop, EcoIdle, and Sensitivity |
| Radio Remote Control | No |
| Shutdown System | High temp, low pressure |
| Display | In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. |
| Controller | Vermeer ACS |
| Deluxe Gauges | Standard |
| Standard Gauges | Fuel and MFD |
Chassis
| Hitch Type | Pintle |
| Trailer Light Type | LED |
| Brake Type | Standard electric or optional hydraulic |
| Wheels - Option Two | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Tires - Option Two | ST235/80R16 Load Range E |
| Capacity - Option Two | 7000 lb (3175.2 kg) |
| Manufacturer - Option Two | Dexter |
| Type - Option Two | Rubber torsional |
| Axle/Suspension - Option Two | Torsion |
| Wheels - Option One | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Tires - Option One | ST235/80/R16 Load Range E |
| Capacity - Option One | 5200 lb (2358.7 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber torsional |
| Axle/Suspension | Torsion |
| Fender Description | Bolt-on steel |
| Tongue Extension | Extendable 24" (61 cm) at 12" (30.5 cm) increments |
| Tongue Description | 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) |
| Frame Description | 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness |
Hydraulic System
| Tank capacity | 7gal (26.5L) |
| System relief pressure | 2500psi (172.4bar) |
| System Type | Open center |
| Recommended Oil Type | Vermeer VMF |
| Oil Cooler | No |
| Directional Control | Yes |
| Flow Control | No |
| Filtration Method | 10 micron return; 100 micron suction |
| Pump Flow at Maximum RPM | 3gpm (11.4L/min) |
Feed System
| Number of Knives | 2 |
| Infeed Table Material Thickness | .2in (.5cm) |
| Distance from Feed Table to Ground | 26in (66cm) |
| Pinch Point - Distance to End of Feed Table | 66.5in (168.9cm) |
| Infeed Throat Capacity | 12 " x 17.5 " (30.5 cm x 43.2 cm) |
| Infeed Hopper Height | 12in (30.5cm) |
| Infeed Table Length | 32in (81.3cm) |
| Infeed Table Width | 52in (132.1cm) |
| Feed Speed | 118ft/min |
| Motor Manufacturer | White |
| Motor Displacement | 28.3 |
| Number of Feed Roller Motors | 1 |
| Weight of Feed Roller | 400lbs (181.4kg) |
| Feed Roller Dimension | 20 " x 17 " (50.8 cm x 43.2 cm) |
| Feed Roller Minimum Distance to Drum | 1in (2.5cm) |
| Feed Roller Clamp Load | 350lbs (158.8kg) |
| Number of Feed Rollers | 1 |
| Feed Roller Orientation | Horizontal |
Discharge System
| Rotational Lock | Yes |
| Rotation Type | Manual rotate with pin lock |
| Chute Rotation Angle | 270deg |
| Chute Height | 101in (256.5cm) |