Overview

The TR5300 trommel screen is ideal for operations where high productivity in a compact size is demanded. The tensioned screen and drum are designed for optimum productivity, offering simple adjustments and maintenance. The ability for the conveyors to go parallel to the ground gives the operator more control over dust and wind, while also allowing for easier maintenance. The TR5300 features a maintenance access platform for the Deutz TD 2.9L Tier 4 Final (Stage IV), 74 hp (55 kW) engine.

Photos
Videos

TR5300 Trommel Screen | Vermeer Recycling Equipment

Features and Benefits

  • With the ability to tension the screen around the drum, operators can add rigidity to the screens. This design allows the use of smaller gauge wire, ultimately increasing the open area of the screen to help improve productivity.
  • Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote. From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.
  • A set of dual-hinged doors on both sides of the machine expose the full length of the trommel drum for ground level service and removal.
  • A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.
  • The TR5300 features a large, low-feed hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite.
Specs
General Dimensions and Weights
Weight 32000 lbs 14515 kg
Hitch Weight 11600 lbs 5261.7 kg
Transport Length 39' 11.9 m
Transport Width 98.4" 249.9 cm
Transport Height 13.4' 4.1 m
Operation Length 89.9' 27.4 m
Operation Width 112.8" 286.5 cm
Operation Height 15' 4.6 m
Capacity 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40%
Engine Option One
Make and Model Deutz TD2.9L Tier 4 Final/ Stage IV
Number of Cylinders 4
Engine Rating 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm
Fuel Tank Capacity 44 gal 166.6 L
Fuel Consumption 4.6
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 30 deg
Battery 950 Cold Cranking Amp Group 31
Oil Filter Spin-on
Recommended Oil Mobil 15W40
Oil Volume with Filter 8.4 qt 7.9 L
System Voltage 12
Air Cleaner Dual element
Radiator Fan Suction
Hydraulic System
Tank capacity 55 gal 208.2 L
Chassis
Frame Description Heavy Duty Structural Tubing
Axle/Suspension Single Leaf Sprung
Capacity 20000 lbs 9071.8 kg
Tires - Option One 445/50R22.5
Hopper and Apron Conveyor
Hopper Capacity 5.5 cu yd 4.2 cu m
Hopper Bottom Width 34" 86.4 cm
Hopper Height 9.5
Hopper Opening 34x37
Screen Drum
Drum Operation 0-30.9 gpm (0-117.0 L/min)
Drum Diameter 5' 1.5 m
Drum Support Description Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width
Thrust Bearing Diameter 4" 10.2 cm
Thrust Bearing Face 2.9" 7.4 cm
Drum Speed 0-24 RPM
Drum Drive Chain 140 custom extended pin
Drum Angle Adjustability 0-7 degrees
Maximum Screen Panels 4
Screen Brushes
Brush Diameter 14" 35.6 cm
Bristle Material Polyethylene
Brush Assembly Support Two 1.25" (3.2 cm) sealed ball bearings
Fines Conveyor
Conveyor Operation 17 gpm 64.4 L/min
Conveyor Motor Displacement 33 cu-in 540.8 cu-cm
Fines Conveyor Length 55' 16.8 m
Fines Belt Speed 500 ft/min 152.4 m/min
Conveyor Belt Width 36" 91.4 cm
Conveyor Belt Type 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option
Conveyor Belt Stacking Height 15'
Head Pulley Type Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide   
Head Pulley Bearing 2 7/16" (6.2 cm) pillow block   
Troughing Idler Type 20° CEMA "B" with permanently sealed bearings
Self-Cleaning Tail Pulley Dimensions 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft   
Head Pulley Takeup 10" 25.4 cm
Self-Cleaning Return Idlers 4" (10.2 cm) rubber disc, qty 8
Fines Conveyor Frame 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing
Overs Conveyor
Overs Conveyor Length 10.5' 3.2 m
Maximum Variable Overs Belt Speed 350 ft/min 106.7 m/min
Conveyor Belt Size 36
Conveyor Belt Type 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option
Conveyor Belt Stacking Height 6'
Head Pulley Type Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide   
Head Pulley Bearing 2 7/16" (6.2 cm) pillow block   
Self-Cleaning Tail Pulley Dimensions 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft